Forde
Split AC installation: What comes with it?
It’s time to make the marks for the wall bracket: You can find an aluminum wall bracket in the split AC box. It has all the holes and attachments you need. This bracket holds the indoor unit of a split AC in place, making sure it doesn’t move. When you start to put in a split ac installation, holes are marked on the wall in a way that corresponds to the bracket. WtFixAir provide all type of AC installation services at Forde.
Before you start drilling holes in a wall, mark where the holes should be on the wall. Then, you take the wall bracket off and use a drilling machine to make holes in the wall at those spots.
It is how essential pipes and wires get through the wall after the bracket is hung on a wall. Copper pipes called refrigerant tubing, drain hose, and electrical cable get through the wall. It is how the indoor unit of a split AC gets connected to its outside counterpart.
The split ac unit installation is attached to the wall bracket with a stronghold. Then, the copper pipes that connect to the indoor unit are pushed through the hole in the wall. The drain pipe that connects to one end of the indoor unit goes through the same spot and is left open for water drainage.
A split AC outdoor unit is hefty, so you should be careful handling it. The outdoor unit of a split AC is taken outside to where it will be put in. Because the outdoor unit is so heavy and shakes so much, the wall where it will be put should be strong enough to handle it.
When the indoor and outdoor units of the split air conditioner are in place, copper pipes and electrical connections are put in place to connect the two teams. A copper pipe goes from the indoor unit to the outdoor unit.
Importance guideline AC installation:
The indoor unit of a split AC needs at least 15 cm of space around its top and sides for good airflow.
It’s essential to ensure that the aluminum bracket you’re attaching to the wall has a slight tilt angle so that the indoor unit of a split AC can be installed at the same angle. This way, the condensed water will flow freely from the drainpipe without being blocked.
The indoor and outdoor units of a split AC should be placed away from direct sunlight to keep them cool.
You also get Ac repair service from WtFixAir.
